Skip to main content

Edifier T5 Review Powered Subwoofer With RCA Passthrough

A subwoofer helps open up your stereo loudspeakers and make them sound fuller, richer and larger while taking a little bit of strain off your amplifiers! Compared to a regular loudspeaker though, a subwoofer doesn't look much different and technically it isn't since a subwoofer is basically a loudspeaker tuned to automatically play low frequencies.
The Edifier T5 uses a 8 inch subwoofer driver enclosed inside an MDF (Medium Density Fiberboard) housing with a wood veneer finish. MDF is a composite of real wood fibers and dense resin and, it's particularly popular for making speaker cabinet enclosures because MDF is strong and dampens vibrations much better than wood could.
MDF doesn't shrink or enlarge either like wood does when it's warm or cold, which would compromise the air tight seal of the enclosure. The Edifier T5 enclosure seams are snug, buffed and perfectly aligned without any gaps or crevices. Metal fasteners have not been used for joining the enclosure panels; hence the Edifier T5 enclosure is sealed with some type of wood adhesive. The Edifier T5 subwoofer is supported by rubber feet, which are reinforced with solid metal rings. On the side, there is a large vent port to let air escape.
The Edifier T5 is a beefy and weighty subwoofer, weighing 14kg and measuring 25cm deep, 28cm wide and 30cm high. The Edifier T5 dial knobs are made of metal alloy and are driver by potentiometers with stop points that provide gradual adjustments with good resistance as you turn the knobs. Both knobs protrude 2cm out.
The Edifier T5 cone driver has a metal cap in the centre and, it is made of polypropylene, which feels like rubbery plastic so, it is strong and stiff, unlike the paper cone drivers in the Edifier R1010BT, which can tear easily. Because the Edifier T5 cone driver is very sturdy, you can leave it exposed by detaching the grill fabric cloth cover, which easily pulls apart via four speaker grill (ball and joint) pegs.
Being a powered subwoofer, the Edifier T5 connects just like a regular loudspeaker and, it's powered using mains electricity via the included figure 8 power cord, which measures 1.7 meters long. The Edifier T5 also comes with two sets of cables - a 1.4 meter long RCA to 3.5cm male cable and a 1.6 meter long RCA to RCA audio cable. While the Edifier T5 is plug and play, it needs setting up just like all subwoofers and that means finding the right placement, phase timing and crossover. You may also need an external amplifier if your loudspeakers are passive (non-powered).
Phase timing is, basically, having the subwoofer driver firing in time (in phase) and in the same direction as the loudspeakers. If the subwoofer is not in phase with the other speakers, it will be firing opposite directions, siphoning out the bass (watch video above), which defies the whole purpose of having a subwoofer in the first place and that is to pump in more bass! The Edifier T5 subwoofer has a basic two setting phase switch (0 degree and 180 degree). More capable sub-woofers come equipped with a variable phase dial knob, which lets you better adjust the balance between your loudspeakers and the subwoofer.
The crossover is the point in which the bass is directed from the loudspeakers and sent to the Edifier T5 subwoofer. The crossover depends mostly on the size of your loudspeakers and, it's important to set correctly to get the most bass out of your loudspeakers. The crossover typically ranges from 60Hz (floor standing loudspeakers), 80Hz (large bookshelf speakers) and 120Hz (small desktop loudspeakers) and, it can be easily adjusted via the low pass filter crossover dial, which in the Edifier T5 is the right dial (LPF) located next to the volume bass dial.
Like with most subwoofers, the connectivity ports and user controls are hidden on the rear and include the RCA pass-through, which makes setup easier when connecting the subwoofer to a signal source and loudspeakers. Some subwoofers only have left and right inputs, which means you would need two use two 3.5mm male to 2 female RCA cables in order to add the subwoofer directly to a signal source and loudspeakers.
The low pass filter determines how much frequency comes into the subwoofer. Sub-woofers tend to have a frequency response, ranging from 20Hz to 150Hz and the Edifier T5 is within that ballpark with a frequency response of 38 Hz to 200 Hz. The human voice frequency response can range from 88Hz (bass voice) to 1,170Hz (soprano voice), which is capable of breaking glass as it is reported Ella Fitzgerald was able to do, shattering glass with her voice! There are three other types of voices, namely baritone voice, tenor voice and contralto voice.
Not all subwoofers have a low pass filter (LPF) crossover and the ones that do have a low pass filter crossover may not be properly implemented to stop vocals coming through the subwoofer. The Edifier T5 has a properly implemented low pass filter crossover built-in, which you can set to 38 Hz (lowest setting) to stop almost entirely vocal output from coming through the subwoofer. You can tell when a subwoofer LPF crossover works well when vocals come through the subwoofer muffled as if the singer is singing with a pillow in their mouth! You can buy the Edifier T5 subwoofer on amazon. Check out the review of the Edifier R1850DB bookshelf speakers and the Edifier P12 passive bookshelf speakers

Popular posts from this blog

HyperX Pulsefire Haste Review Honeycomb Mouse With Removable Grips

From bodybuilding to drifting, cutting weight is essential if you want to stay on top of your game! This includes gaming where "Game Over" is not an option unless of course, you're playing the Game Over mission in Call of Duty 4! Both keyboard and mouse have a special place in every PC gamer's heart, particularly when playing first person shooter games. Being swift and light weight are an advantage; hence the advent of gaming mice with holes such as the HyperX Pulsefire Haste. Unlike its predecessor - the Pulsefire Raid - which has a solid shell, HyperX's new Pulsefire Haste has honeycomb-shaped perforations punched across the top and bottom of the mouse. The hole punch design not only looks like a target with bullet holes, it is also functional, allowing the Pulsefire Haste to sport a lighter and more breathable body shell. Compared to the Pulsefire Raid, which weighs 94 grams (without the cable), the Pulsefire Haste has managed a phenomenal 34-gram weight reduc...

Steelers Players React to Death of Hall of Famer Kevin Greene

  The Pittsburgh Steelers were simply leaving the group inn in Cincinnati on Monday, preparing for their early evening game against the Bengals, when word began to circle via web-based media about the demise of amazing Steelers linebacker and Pro Football Hall of Famer Kevin Greene.  Greene, who played with the Steelers from 1993-95, had an effect in Pittsburgh on the field, encouraging lead the group to a Super Bowl in 1995, and off, where he stayed a famous figure among the fanbase.  A portion of the current Steelers players took some time from their groundwork for the game to communicate their sentiments about his passing via web-based media.  "It's an Honor to Represent this incredible Number today for you and your family," protection end Stephon Tuitt, who wears Greene's previous No. 91 uniform, composed on Instagram. "I will make you all glad. Supplications to Kevin Greene a legend.  "So dismal to hear the information on Kevin Greene dying," prote...

Outdoor Vitals Shadowlight Ultralight Review Hiking Pack With Removable CCF Back Pad

Traditional backpacking has really come along way from the days of 50 pound (22kg) packs to today's ultralight backpacking with a base weight as low as 6 pounds (2.7kg)! Ultralight backpacking isn't just about comfort. It is an art and science. Because you carry fewer things, ultralight backpacking brings you closer to the ultimate ultralight system, which would be carrying just a knife and getting everything you need from your environment.  While not everyone can pull off the "Life and Times of Grizzly Adams", it's something we can all aim for by carrying fewer things on a trail and let mother ingenuity take its place. The pack seen pictured, it's the 60 litre Shadowlight Ultralight by Outdoor Vitals - an internal framed ultralight backpack that uses Spectra and Robic Nylon fabric blend to keep the weight down. So much so, in fact, that the Outdoor Vitals Shadowlight Ultralight weighs just 1.9 pounds (890 grams). The drastic weight reduction has been achieved...